Fully equipped with free moving deep stroke suspension, dampers on all four wheels, special pattern hollow rubber tires and ample ground clearance for rough road skills beyond your imagination. The Overland is also a great hill climber and comes equipped with a diff locking mechanism for maximum traction. A new beginning for indoor motorsports has arrived!

Features:
- Newly developed unique suspension system.
- Equipped with bevel diff gears for smooth and stable cornering.
- Damper units on all four wheels work together to hug the contours of the road surface.
- Includes high performance FET amp with brake and reverse function, and FET steering servo.
- Newly designed servo saver provides protection from hard kickbacks from the surface.
- Ample approach and departures angles for aggressive running power.
- Equipped with front under-chassis guard to protect the chassis.
- Special pattern hollow rubber tires for great gripping power.
- Pinion gears included allow four different gear ratios to be chosen.
- Two fixed motor plate types mean no adjustment necessary for gear teeth meshing.
- 6 different set-up variables make 4 different wheelbase settings possible
- Body comes complete with colouring, markings and door mirrors.
- Special body mount system allows body to be removed/attached simply by spreading the side panels.
- Possible to race twelve (12) cars against each other (using narrow band frequencies).

Includes:
- Overland car
- Perfex 2-channel pistol radio
- electronic speed control
- servo saver
- 130-size motor
- 9,11 and 12 tooth pinion gears (10 tooth gear pre-installed).
- One plastic wheel nut wrench.
- Two 2x6mm self threading screws
- Two 2mm washers for car antenna.
- One metal wire receiver antenna.
- One plastic differential lock plate.
- Two extra plastic wheel nuts.
- Two plastic battery holders.
- One plastic pinion gear remover.
- Two additional rear front shock mounts (used for different wheelbases)
- One additional rear shock mount (used for different wheelbases).
- One plastic motor spacer.
- Two additional plastic c-clips (holds the king pin in place).

Requires:
- Attaching the body to the chassis
- Installing the transmitter antenna into the transmitter
- Installing alkaline batteries into the transmitter and chassis.
- 4 "AAA" alkaline batteries for the car
- 8 "AA" alkaline batteries for the transmitter

Specifications:
Length: 5.3 in (136mm)
Width: 2.75 in (70mm)
Height: 1.9 in (48mm)
Weight: 7.4 oz (210g)
Track(F/R): 60mm
Tire Size: 30 x 10mm
Wheelbase: 95mm
Gear ratio: 13.6 , 12.2 , 11.1 , 10.2:1
Approach angle: 53?
Departure angle: 40?
Move Wheelebase: 95,100,105,110mm
Frequency: Channel 08